FingerTech
FingerTech S3M Timing Belt Loops
FingerTech S3M Timing Belt Loops
Couldn't load pickup availability
A full range of FingerTech S3M Timing Belt available fast post in New Zealand.
The go to for belts in Combat Robotics!
IF YOU NEED A SIZE THAT IS OUT OF STOCK, CONTACT US. WE CAN GET THEM DELIVERED FAST.
We are now stocking a full range of the FingerTech Timing Belts here in NZ .
Use with the FingerTech S3M pulleys, or any other 3mm pitch pulley.
Specifications:
•S3M pitch (3mm high-torque) Pitch (distance between tooth centers): 3mm
•Width: 4mm
•Material: Chloroprene Rubber with Fiberglass reinforcement
•Tensile strength: 19-25MPa
•Max load: 360 Newtons
•Weight (smallest to largest): 1 – 4g (0.04 – 0.14oz)
•Circumference, # of Teeth:
| 120mm, 40T 129mm, 43T 144mm, 48T 150mm, 50T 165mm, 55T 171mm, 57T 177mm, 59T 180mm, 60T |
189mm, 63T 192mm, 64T 195mm, 65T 201mm, 67T 207mm, 69T 210mm, 70T 222mm, 74T 231mm, 77T |
246mm, 82T 255mm, 85T 264mm, 88T 276mm, 92T 288mm, 96T 300mm, 100T 312mm, 104T 321mm, 107T |
339mm, 113T 375mm, 125T 378mm, 126T 384mm, 128T 390mm, 130T 396mm, 132T 402mm, 134T 408mm, 136T |
HOW TO CHOOSE A FINGERTECH PULLEY AND BELT.
Use their handy “FingerTech Robotics Pulley & Belt Calculator” here
www.fingertechrobotics.com/how-to_pulley_belt.php
NOTES:
The Fingertech Beater Bar kit uses these by default.
1 – FingerTech 15T S3M Timing Pulley (bored to 1/8in to fit motor shaft)
1 – FingerTech 67T (201mm) Timing Belt
1 – 30T S3M pulley
